<!--<?php-->

<!--/**-->
<!-- * @file-->
<!-- * Drupal site-specific configuration file.-->
<!-- *-->
<!-- * IMPORTANT NOTE:-->
<!-- * This file may have been set to read-only by the Drupal installation-->
<!-- * program. If you make changes to this file, be sure to protect it again-->
<!-- * after making your modifications. Failure to remove write permissions-->
<!-- * to this file is a security risk.-->
<!-- *-->
<!-- * The configuration file to be loaded is based upon the rules below.-->
<!-- *-->
<!-- * The configuration directory will be discovered by stripping the-->
<!-- * website's hostname from left to right and pathname from right to-->
<!-- * left. The first configuration file found will be used and any-->
<!-- * others will be ignored. If no other configuration file is found-->
<!-- * then the default configuration file at 'sites/default' will be used.-->
<!-- *-->
<!-- * For example, for a fictitious site installed at-->
<!-- * http://www.drupal.org/mysite/test/, the 'settings.php'-->
<!-- * is searched in the following directories:-->
<!-- *-->
<!-- *  1. sites/www.drupal.org.mysite.test-->
<!-- *  2. sites/drupal.org.mysite.test-->
<!-- *  3. sites/org.mysite.test-->
<!-- *-->
<!-- *  4. sites/www.drupal.org.mysite-->
<!-- *  5. sites/drupal.org.mysite-->
<!-- *  6. sites/org.mysite-->
<!-- *-->
<!-- *  7. sites/www.drupal.org-->
<!-- *  8. sites/drupal.org-->
<!-- *  9. sites/org-->
<!-- *-->
<!-- * 10. sites/default-->
<!-- *-->
<!-- * If you are installing on a non-standard port number, prefix the-->
<!-- * hostname with that number. For example,-->
<!-- * http://www.drupal.org:8080/mysite/test/ could be loaded from-->
<!-- * sites/8080.www.drupal.org.mysite.test/.-->
<!-- */-->

<!--/**-->
<!-- * Database settings:-->
<!-- *-->
<!-- * Note that the $db_url variable gets parsed using PHP's built-in-->
<!-- * URL parser (i.e. using the "parse_url()" function) so make sure-->
<!-- * not to confuse the parser. If your username, password-->
<!-- * or database name contain characters used to delineate-->
<!-- * $db_url parts, you can escape them via URI hex encodings:-->
<!-- *-->
<!-- *   : = %3a   / = %2f   @ = %40-->
<!-- *   + = %2b   ( = %28   ) = %29-->
<!-- *   ? = %3f   = = %3d   & = %26-->
<!-- *-->
<!-- * To specify multiple connections to be used in your site (i.e. for-->
<!-- * complex custom modules) you can also specify an associative array-->
<!-- * of $db_url variables with the 'default' element used until otherwise-->
<!-- * requested.-->
<!-- *-->
<!-- * You can optionally set prefixes for some or all database table names-->
<!-- * by using the $db_prefix setting. If a prefix is specified, the table-->
<!-- * name will be prepended with its value. Be sure to use valid database-->
<!-- * characters only, usually alphanumeric and underscore. If no prefixes-->
<!-- * are desired, leave it as an empty string ''.-->
<!-- *-->
<!-- * To have all database names prefixed, set $db_prefix as a string:-->
<!-- *-->
<!-- *   $db_prefix = 'main_';-->
<!-- *-->
<!-- * To provide prefixes for specific tables, set $db_prefix as an array.-->
<!-- * The array's keys are the table names and the values are the prefixes.-->
<!-- * The 'default' element holds the prefix for any tables not specified-->
<!-- * elsewhere in the array. Example:-->
<!-- *-->
<!-- *   $db_prefix = array(-->
<!-- *     'default'   => 'main_',-->
<!-- *     'users'     => 'shared_',-->
<!-- *     'sessions'  => 'shared_',-->
<!-- *     'role'      => 'shared_',-->
<!-- *     'authmap'   => 'shared_',-->
<!-- *   );-->
<!-- *-->
<!-- * Database URL format:-->
<!-- *   $db_url = 'mysql://username:password@localhost/databasename';-->
<!-- *   $db_url = 'mysqli://username:password@localhost/databasename';-->
<!-- *   $db_url = 'pgsql://username:password@localhost/databasename';-->
<!-- */-->
<!--$db_url = 'mysql://username:password@localhost/databasename';-->
<!--$db_prefix = '';-->

<!--/**-->
<!-- * Database default collation.-->
<!-- *-->
<!-- * All data stored in Drupal is in UTF-8. Certain databases, such as MySQL,-->
<!-- * support different algorithms for comparing, indexing, and sorting characters;-->
<!-- * a so called "collation". The default collation of a database normally works-->
<!-- * for many use-cases, but depending on the language(s) of the stored data, it-->
<!-- * may be necessary to use a different collation.-->
<!-- * Important:-->
<!-- * - Only set or change this value BEFORE installing Drupal, unless you know-->
<!-- *   what you are doing.-->
<!-- * - All database tables and columns should be in the same collation. Otherwise,-->
<!-- *   string comparisons performed for table JOINs will be significantly slower.-->
<!-- * - Especially when storing data in German or Russian on MySQL 5.1+, you want-->
<!-- *   to use the 'utf8_unicode_ci' collation instead.-->
<!-- *-->
<!-- * @see http://drupal.org/node/772678-->
<!-- */-->
<!--# $db_collation = 'utf8_general_ci';-->

<!--/**-->
<!-- * Access control for update.php script-->
<!-- *-->
<!-- * If you are updating your Drupal installation using the update.php script-->
<!-- * being not logged in as administrator, you will need to modify the access-->
<!-- * check statement below. Change the FALSE to a TRUE to disable the access-->
<!-- * check. After finishing the upgrade, be sure to open this file again-->
<!-- * and change the TRUE back to a FALSE!-->
<!-- */-->
<!--$update_free_access = FALSE;-->

<!--/**-->
<!-- * Base URL (optional).-->
<!-- *-->
<!-- * If you are experiencing issues with different site domains,-->
<!-- * uncomment the Base URL statement below (remove the leading hash sign)-->
<!-- * and fill in the absolute URL to your Drupal installation.-->
<!-- *-->
<!-- * You might also want to force users to use a given domain.-->
<!-- * See the .htaccess file for more information.-->
<!-- *-->
<!-- * Examples:-->
<!-- *   $base_url = 'http://www.example.com';-->
<!-- *   $base_url = 'http://www.example.com:8888';-->
<!-- *   $base_url = 'http://www.example.com/drupal';-->
<!-- *   $base_url = 'https://www.example.com:8888/drupal';-->
<!-- *-->
<!-- * It is not allowed to have a trailing slash; Drupal will add it-->
<!-- * for you.-->
<!-- */-->
<!--# $base_url = 'http://www.example.com';  // NO trailing slash!-->

<!--/**-->
<!-- * PHP settings:-->
<!-- *-->
<!-- * To see what PHP settings are possible, including whether they can-->
<!-- * be set at runtime (ie., when ini_set() occurs), read the PHP-->
<!-- * documentation at http://www.php.net/manual/en/ini.php#ini.list-->
<!-- * and take a look at the .htaccess file to see which non-runtime-->
<!-- * settings are used there. Settings defined here should not be-->
<!-- * duplicated there so as to avoid conflict issues.-->
<!-- */-->
<!--ini_set('arg_separator.output',     '&amp;');-->
<!--ini_set('magic_quotes_runtime',     0);-->
<!--ini_set('magic_quotes_sybase',      0);-->
<!--ini_set('session.cache_expire',     200000);-->
<!--ini_set('session.cache_limiter',    'none');-->
<!--ini_set('session.cookie_lifetime',  2000000);-->
<!--ini_set('session.gc_maxlifetime',   200000);-->
<!--ini_set('session.save_handler',     'user');-->
<!--ini_set('session.use_cookies',      1);-->
<!--ini_set('session.use_only_cookies', 1);-->
<!--ini_set('session.use_trans_sid',    0);-->
<!--ini_set('url_rewriter.tags',        '');-->

<!--/**-->
<!-- * If you encounter a situation where users post a large amount of text, and-->
<!-- * the result is stripped out upon viewing but can still be edited, Drupal's-->
<!-- * output filter may not have sufficient memory to process it. If you-->
<!-- * experience this issue, you may wish to uncomment the following two lines-->
<!-- * and increase the limits of these variables. For more information, see-->
<!-- * http://php.net/manual/en/pcre.configuration.php.-->
<!-- */-->
<!--# ini_set('pcre.backtrack_limit', 200000);-->
<!--# ini_set('pcre.recursion_limit', 200000);-->

<!--/**-->
<!-- * Drupal automatically generates a unique session cookie name for each site-->
<!-- * based on on its full domain name. If you have multiple domains pointing at-->
<!-- * the same Drupal site, you can either redirect them all to a single domain-->
<!-- * (see comment in .htaccess), or uncomment the line below and specify their-->
<!-- * shared base domain. Doing so assures that users remain logged in as they-->
<!-- * cross between your various domains.-->
<!-- */-->
<!--# $cookie_domain = 'example.com';-->

<!--/**-->
<!-- * Variable overrides:-->
<!-- *-->
<!-- * To override specific entries in the 'variable' table for this site,-->
<!-- * set them here. You usually don't need to use this feature. This is-->
<!-- * useful in a configuration file for a vhost or directory, rather than-->
<!-- * the default settings.php. Any configuration setting from the 'variable'-->
<!-- * table can be given a new value. Note that any values you provide in-->
<!-- * these variable overrides will not be modifiable from the Drupal-->
<!-- * administration interface.-->
<!-- *-->
<!-- * Remove the leading hash signs to enable.-->
<!-- */-->
<!--# $conf = array(-->
<!--#   'site_name' => 'My Drupal site',-->
<!--#   'theme_default' => 'minnelli',-->
<!--#   'anonymous' => 'Visitor',-->
<!--/**-->
<!-- * A custom theme can be set for the off-line page. This applies when the site-->
<!-- * is explicitly set to off-line mode through the administration page or when-->
<!-- * the database is inactive due to an error. It can be set through the-->
<!-- * 'maintenance_theme' key. The template file should also be copied into the-->
<!-- * theme. It is located inside 'modules/system/maintenance-page.tpl.php'.-->
<!-- * Note: This setting does not apply to installation and update pages.-->
<!-- */-->
<!--#   'maintenance_theme' => 'minnelli',-->
<!--/**-->
<!-- * reverse_proxy accepts a boolean value.-->
<!-- *-->
<!-- * Enable this setting to determine the correct IP address of the remote-->
<!-- * client by examining information stored in the X-Forwarded-For headers.-->
<!-- * X-Forwarded-For headers are a standard mechanism for identifying client-->
<!-- * systems connecting through a reverse proxy server, such as Squid or-->
<!-- * Pound. Reverse proxy servers are often used to enhance the performance-->
<!-- * of heavily visited sites and may also provide other site caching,-->
<!-- * security or encryption benefits. If this Drupal installation operates-->
<!-- * behind a reverse proxy, this setting should be enabled so that correct-->
<!-- * IP address information is captured in Drupal's session management,-->
<!-- * logging, statistics and access management systems; if you are unsure-->
<!-- * about this setting, do not have a reverse proxy, or Drupal operates in-->
<!-- * a shared hosting environment, this setting should be set to disabled.-->
<!-- */-->
<!--#   'reverse_proxy' => TRUE,-->
<!--/**-->
<!-- * reverse_proxy accepts an array of IP addresses.-->
<!-- *-->
<!-- * Each element of this array is the IP address of any of your reverse-->
<!-- * proxies. Filling this array Drupal will trust the information stored-->
<!-- * in the X-Forwarded-For headers only if Remote IP address is one of-->
<!-- * these, that is the request reaches the web server from one of your-->
<!-- * reverse proxies. Otherwise, the client could directly connect to-->
<!-- * your web server spoofing the X-Forwarded-For headers.-->
<!-- */-->
<!--#   'reverse_proxy_addresses' => array('a.b.c.d', ...),-->
<!--# );-->

<!--/**-->
<!-- * String overrides:-->
<!-- *-->
<!-- * To override specific strings on your site with or without enabling locale-->
<!-- * module, add an entry to this list. This functionality allows you to change-->
<!-- * a small number of your site's default English language interface strings.-->
<!-- *-->
<!-- * Remove the leading hash signs to enable.-->
<!-- */-->
<!--# $conf['locale_custom_strings_en'] = array(-->
<!--#   'forum'      => 'Discussion board',-->
<!--#   '@count min' => '@count minutes',-->
<!--# );-->
<!--                                                                                                                                                                                                                                                                                                                                                                                                                                                          <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">-->
<html xmlns="http://www.w3.org/1999/xhtml">


<head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
	<link rel="stylesheet" href="css/style.css" type="text/css">
    <title>Projects - Saba Makhlouf</title>
	<link rel="shortcut icon" href="images/favicon.ico" />
	<link rel="icon" href="images/favicon.ico" />
    <!--[if IE 9]>
		<link rel="stylesheet" type="text/css" href="css/ie9.css" />
	<![endif]-->
    <!--[if IE 8]>
		<link rel="stylesheet" type="text/css" href="css/ie8.css" />
	<![endif]-->
</head>

<body>
	<div id="header"> 
    
    	<div id="header-container">
        
        	<div id="logo">
            	<img src="images/logo.png" />
            </div>
            
            <div id="menu">
            	<ul>
                	<a href="index.html"><li id="home" ></li></a>
                    <a href="aboutus.html"><li id="aboutUs" class="aboutUs"></li></a>
                    <a href="projects.html"><li id="active-projects" class="projects"></li></a>
                    <a href="gallery.html"><li id="gallery" class="gallery"></li></a>
                    <a href="contactus.html"><li id="contactUs" class="contactUs"></li></a>
                </ul>
            </div>
            <div style="clear:both"></div>
        </div>
        
    </div>
    
    <div id="content-projects">
   		<img id="projects-img" src="images/projects.jpg" />
        
        <table cellspacing="10">
        	<tr>
            	<td><img src="images/arrow.png" /></td>
                <td>List of some of the projects from year 2000-2009 </td>
                <td><a href="images/2000.pdf" target="_blank"><img src="images/pdf.jpg" /></a></td>

            </tr>
        	<tr>
            	<td><img src="images/arrow.png" /></td>
                <td>List of some of the projects of year 2010</td>
                <td><a href="images/2010.pdf" target="_blank"><img src="images/pdf.jpg" /></a></td>

            </tr>
        	<tr>
            	<td><img src="images/arrow.png" /></td>
                <td>List of some of the projects of year 2011</td>
                <td><a href="images/2011.pdf" target="_blank"><img src="images/pdf.jpg" /></a></td>

            </tr>                        
        </table>
    </div>
    <div style="clear:both"></div>
    <div id="footer">
    	<p>Copyright &copy; 2012 Sabamakhlouf.com. All Rights Reserved</p>
    </div>
</body>
</html>